dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.6 (koen@rrMBP) (gcc version 4.7.3 20130205 (prerelease) (Linaro GCC 4.7-2013.02-01) ) #1 SMP Sat Apr 13 09:10:52 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c0683340, node_mem_map c0702000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0b11000 s13952 r8192 d14720 u36864
[ 0.000000] pcpu-alloc: s13952 r8192 d14720 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0,115200n8 run_hardware_tests quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 510436k/510436k available, 13852k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05d8afc (5955 kB)
[ 0.000000] .init : 0xc05d9000 - 0xc060d680 ( 210 kB)
[ 0.000000] .data : 0xc060e000 - 0xc0685e98 ( 480 kB)
[ 0.000000] .bss : 0xc0685e98 - 0xc0701c84 ( 496 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000359] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015428] pid_max: default: 32768 minimum: 301
[ 0.015679] Security Framework initialized
[ 0.015777] Mount-cache hash table entries: 512
[ 0.025281] Initializing cgroup subsys cpuacct
[ 0.025312] Initializing cgroup subsys memory
[ 0.025379] Initializing cgroup subsys blkio
[ 0.025518] CPU: Testing write buffer coherency: ok
[ 0.026038] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026116] Setting up static identity map for 0x80371e78 - 0x80371ec4
[ 0.027766] Brought up 1 CPUs
[ 0.027790] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029007] devtmpfs: initialized
[ 0.094502] pinctrl core: initialized pinctrl subsystem
[ 0.095131] regulator-dummy: no parameters
[ 0.095720] NET: Registered protocol family 16
[ 0.096541] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.106230] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.106416] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.107143] platform 49000000.edma: alias fck already exists
[ 0.107176] platform 49000000.edma: alias fck already exists
[ 0.107258] platform 49000000.edma: alias fck already exists
[ 0.108414] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.108589] OMAP GPIO hardware version 0.1
[ 0.110015] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.111324] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.112609] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.118357] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.120561] cpsw.0: No hwaddr in dt. Using c8:a0:30:b4:0a:b4 from efuse
[ 0.120591] cpsw.1: No hwaddr in dt. Using c8:a0:30:b4:0a:b6 from efuse
[ 0.131725] bio: create slab <bio-0> at 0
[ 0.143447] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.143664] of_get_named_gpio_flags: can't parse gpios property
[ 0.143918] vmmcsd_fixed: 3300 mV
[ 0.146711] SCSI subsystem initialized
[ 0.147183] usbcore: registered new interface driver usbfs
[ 0.147304] usbcore: registered new interface driver hub
[ 0.147600] usbcore: registered new device driver usb
[ 0.149633] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.151967] DCDC1: at 1500 mV
[ 0.153170] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 0.154354] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.155463] LDO1: at 1800 mV
[ 0.156613] LDO2: at 3300 mV
[ 0.158580] LDO3: 1800 mV
[ 0.159686] LDO4: at 3300 mV
[ 0.160749] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.161445] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.162209] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.164654] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.165440] Advanced Linux Sound Architecture Driver Initialized.
[ 0.166838] Switching to clocksource gp_timer
[ 0.218709] NET: Registered protocol family 2
[ 0.219811] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.219952] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.220114] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.220208] TCP: reno registered
[ 0.220235] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.220280] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.220698] NET: Registered protocol family 1
[ 0.221297] RPC: Registered named UNIX socket transport module.
[ 0.221317] RPC: Registered udp transport module.
[ 0.221331] RPC: Registered tcp transport module.
[ 0.221345] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.222493] CPU PMU: probing PMU on CPU 0
[ 0.222525] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.222989] omap2_mbox_probe: platform not supported
[ 0.485948] VFS: Disk quotas dquot_6.5.2
[ 0.486186] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.487459] NFS: Registering the id_resolver key type
[ 0.487575] Key type id_resolver registered
[ 0.487593] Key type id_legacy registered
[ 0.487660] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[ 0.488096] msgmni has been set to 996
[ 0.490960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.490984] io scheduler noop registered
[ 0.491000] io scheduler deadline registered
[ 0.491041] io scheduler cfq registered (default)
[ 0.492288] tps65217-bl tps65217-bl: no platform data provided
[ 0.492328] tps65217-bl: probe of tps65217-bl failed with error -22
[ 0.493270] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.495699] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 0.496027] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 0.516094] console [ttyO0] enabled
[ 0.517118] [drm] Initialized drm 1.1.0 20060810
[ 0.530661] brd: module loaded
[ 0.537762] loop: module loaded
[ 0.537889] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.537979] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.538110] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.538182] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.538251] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.545146] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5A,1813BBBK1820'
[ 0.545188] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
[ 0.575163] bone-capemgr bone_capemgr.8: slot #0: No cape found
[ 0.612270] bone-capemgr bone_capemgr.8: slot #1: No cape found
[ 0.649377] bone-capemgr bone_capemgr.8: slot #2: No cape found
[ 0.686487] bone-capemgr bone_capemgr.8: slot #3: No cape found
[ 0.692726] bone-capemgr bone_capemgr.8: slot #4: specific override
[ 0.692767] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
[ 0.692797] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[ 0.692959] bone-capemgr bone_capemgr.8: slot #5: specific override
[ 0.692995] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
[ 0.693023] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[ 0.693545] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[ 0.693579] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[ 0.693837] bone-capemgr bone_capemgr.8: slot #4: #2 overlays
[ 0.694153] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays.
[ 0.694389] bone-capemgr bone_capemgr.8: initialized OK.
[ 0.696443] OneNAND driver initializing
[ 0.697867] usbcore: registered new interface driver asix
[ 0.697978] usbcore: registered new interface driver cdc_ether
[ 0.698095] usbcore: registered new interface driver smsc95xx
[ 0.698285] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[ 0.698326] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[ 0.698582] bone-capemgr bone_capemgr.8: slot #5: #2 overlays
[ 0.699978] platform 4830e000.fb: alias fck already exists
[ 0.700316] bone-capemgr bone_capemgr.8: slot #5: Applied #2 overlays.
[ 0.700500] usbcore: registered new interface driver net1080
[ 0.700615] usbcore: registered new interface driver cdc_subset
[ 0.700703] usbcore: registered new interface driver zaurus
[ 0.700860] usbcore: registered new interface driver cdc_ncm
[ 0.701607] Initializing USB Mass Storage driver...
[ 0.701745] usbcore: registered new interface driver usb-storage
[ 0.701760] USB Mass Storage support registered.
[ 0.701956] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.702458] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 0.702487] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[ 0.702528] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.702547] musb-hdrc: MHDRC RTL version 2.0
[ 0.702562] musb-hdrc: setup fifo_mode 4
[ 0.702588] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.702728] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 0.702750] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 0.703443] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 0.703471] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[ 0.703507] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.703525] musb-hdrc: MHDRC RTL version 2.0
[ 0.703539] musb-hdrc: setup fifo_mode 4
[ 0.703561] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.703684] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 0.703705] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 0.703727] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 0.704202] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 0.704244] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 0.704360] usb usb1: default language 0x0409
[ 0.704420] usb usb1: udev 1, busnum 1, minor = 0
[ 0.704444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.704466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704487] usb usb1: Product: MUSB HDRC host driver
[ 0.704507] usb usb1: Manufacturer: Linux 3.8.6 musb-hcd
[ 0.704525] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 0.705273] usb usb1: usb_probe_device
[ 0.705301] usb usb1: configuration #1 chosen from 1 choice
[ 0.705368] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.705570] hub 1-0:1.0: usb_probe_interface
[ 0.705592] hub 1-0:1.0: usb_probe_interface - got id
[ 0.705621] hub 1-0:1.0: USB hub found
[ 0.705661] hub 1-0:1.0: 1 port detected
[ 0.705681] hub 1-0:1.0: standalone hub
[ 0.705699] hub 1-0:1.0: individual port power switching
[ 0.705716] hub 1-0:1.0: no over-current protection
[ 0.705734] hub 1-0:1.0: Single TT
[ 0.705754] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.705774] hub 1-0:1.0: power on to power good time: 10ms
[ 0.705814] hub 1-0:1.0: local power source is good
[ 0.705931] hub 1-0:1.0: enabling power on all ports
[ 0.707182] mousedev: PS/2 mouse device common for all mice
[ 0.709325] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 0.709633] i2c /dev entries driver
[ 0.710695] Driver for 1-wire Dallas network protocol.
[ 0.712280] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 0.712631] cpuidle: using governor ladder
[ 0.712651] cpuidle: using governor menu
[ 0.713034] of_get_named_gpio_flags: can't parse gpios property
[ 0.713052] of_get_named_gpio_flags: can't parse gpios property
[ 0.713068] of_get_named_gpio_flags: can't parse gpios property
[ 0.713129] omap_hsmmc mmc.3: unable to select pin group
[ 0.713405] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 0.713489] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 0.713703] mmc.3 supply vmmc_aux not found, using dummy regulator
[ 0.713936] omap_hsmmc mmc.3: pins are not configured from the driver
[ 0.741328] of_get_named_gpio_flags: can't parse gpios property
[ 0.741350] of_get_named_gpio_flags: can't parse gpios property
[ 0.741380] of_get_named_gpio_flags exited with status 52
[ 0.741921] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[ 0.741999] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[ 0.742569] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 0.742686] omap_hsmmc mmc.4: pins are not configured from the driver
[ 0.770954] pinctrl-single 44e10800.pinmux: pin 44e1080c already requested by mmc.4; cannot claim for gpio-leds.7
[ 0.781753] pinctrl-single 44e10800.pinmux: pin-3 (gpio-leds.7) status -22
[ 0.788967] pinctrl-single 44e10800.pinmux: could not request pin 3 on device pinctrl-single
[ 0.797852] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 0.797890] of_get_named_gpio_flags exited with status 53
[ 0.797912] of_get_named_gpio_flags exited with status 54
[ 0.797934] of_get_named_gpio_flags exited with status 55
[ 0.797955] of_get_named_gpio_flags exited with status 56
[ 0.797979] of_get_named_gpio_flags exited with status 53
[ 0.798245] of_get_named_gpio_flags exited with status 54
[ 0.798448] of_get_named_gpio_flags exited with status 55
[ 0.798626] of_get_named_gpio_flags exited with status 56
[ 0.799011] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.799423] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 0.799506] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 0.801775] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 0.801906] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 0.801984] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 0.803128] usbcore: registered new interface driver usbhid
[ 0.803147] usbhid: USB HID core driver
[ 0.805487] TCP: cubic registered
[ 0.805509] Initializing XFRM netlink socket
[ 0.805554] NET: Registered protocol family 17
[ 0.805765] NET: Registered protocol family 15
[ 0.805948] Key type dns_resolver registered
[ 0.806208] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.806245] ThumbEE CPU extension supported.
[ 0.806282] Registering SWP/SWPB emulation handler
[ 0.807370] registered taskstats version 1
[ 0.807846] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 0.807930] hub 1-0:1.0: hub_suspend
[ 0.807971] usb usb1: bus auto-suspend, wakeup 1
[ 0.810955] of_get_named_gpio_flags: can't parse gpios property
[ 0.810984] tilcdc 4830e000.fb: No power control GPIO
[ 0.824037] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 0.827103] mmc0: new high speed SDHC card at address aaaa
[ 0.827834] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 0.830194] mmcblk0: p1 p2
[ 0.879036] usb usb1: usb wakeup-resume
[ 0.879089] usb usb1: usb auto-resume
[ 0.879119] hub 1-0:1.0: hub_resume
[ 0.879171] hub 1-0:1.0: port 1: status 0101 change 0001
[ 0.883383] mmc1: BKOPS_EN bit is not set
[ 0.886053] mmc1: new high speed MMC card at address 0001
[ 0.886840] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
[ 0.887187] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[ 0.887542] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[ 0.889723] mmcblk1: p1 p2
[ 0.892466] mmcblk1boot1: unknown partition table
[ 0.894517] mmcblk1boot0: unknown partition table
[ 0.920039] tilcdc 4830e000.fb: found TDA19988
[ 0.920918] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.920935] [drm] No driver support for vblank timestamp query.
[ 0.921383] tilcdc 4830e000.fb: No connectors reported connected with modes
[ 0.921411] [drm] Cannot find any crtc or sizes - going 1024x768
[ 0.938808] Console: switching to colour frame buffer device 128x48
[ 0.952111] tilcdc 4830e000.fb: fb0: frame buffer device
[ 0.952132] tilcdc 4830e000.fb: registered panic notifier
[ 0.952170] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[ 0.981529] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 0.981598] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 1.002902] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.002927] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 1.003958] libphy: 4a101000.mdio: probed
[ 1.003989] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.004208] Detected MACID = c8:a0:30:b4:0a:b4
[ 1.004322] cpsw 4a100000.ethernet: NAPI disabled
[ 1.005938] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 1.009095] ALSA device list:
[ 1.009108] No soundcards found.
[ 1.040000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.040062] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.050743] devtmpfs: mounted
[ 1.050991] Freeing init memory: 208K
[ 1.086901] usb 1-1: new full-speed USB device number 2 using musb-hdrc
[ 1.206520] usb 1-1: skipped 10 descriptors after interface
[ 1.206540] usb 1-1: skipped 2 descriptors after interface
[ 1.206555] usb 1-1: skipped 1 descriptor after endpoint
[ 1.206567] usb 1-1: skipped 2 descriptors after interface
[ 1.206579] usb 1-1: skipped 1 descriptor after endpoint
[ 1.206590] usb 1-1: skipped 1 descriptor after interface
[ 1.206682] usb 1-1: default language 0x0409
[ 1.206814] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.206830] usb 1-1: New USB device found, idVendor=0c76, idProduct=1607
[ 1.206843] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.206855] usb 1-1: Product: USB Headphone Set
[ 1.207301] usb 1-1: usb_probe_device
[ 1.207318] usb 1-1: configuration #1 chosen from 1 choice
[ 1.207447] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.207627] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
[ 1.207748] usb 1-1: adding 1-1:1.2 (config #1, interface 2)
[ 1.207877] usb 1-1: adding 1-1:1.3 (config #1, interface 3)
[ 1.208103] usbhid 1-1:1.3: usb_probe_interface
[ 1.208117] usbhid 1-1:1.3: usb_probe_interface - got id
[ 1.210130] input: USB Headphone Set as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.3/input/input0
[ 1.210419] hid-generic 0003:0C76:1607.0001: input: USB HID v1.00 Device [USB Headphone Set] on usb-musb-hdrc.1.auto-1/input3
[ 1.210748] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 1.210781] hub 1-0:1.0: port 1 enable change, status 00000103
[ 1.839888] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom)
[ 1.939337] systemd[1]: Inserted module 'autofs4'
[ 1.941208] systemd[1]: Set hostname to <beaglebone>.
[ 1.945388] systemd[1]: Initializing machine ID from random generator.
[ 1.945688] systemd[1]: Installed transient /etc/machine-id file.
[ 2.272686] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.273159] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.273272] systemd[1]: Expecting device dev-ttyO0.device...
[ 2.273366] systemd[1]: Starting Remote File Systems.
[ 2.273434] systemd[1]: Reached target Remote File Systems.
[ 2.273509] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.273700] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.273766] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.273915] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.274009] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.274260] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.274668] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.275364] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.275896] systemd[1]: Starting udev Kernel Socket.
[ 2.276124] systemd[1]: Listening on udev Kernel Socket.
[ 2.276645] systemd[1]: Starting udev Control Socket.
[ 2.276900] systemd[1]: Listening on udev Control Socket.
[ 2.276981] systemd[1]: Starting Swap.
[ 2.277053] systemd[1]: Reached target Swap.
[ 2.277151] systemd[1]: Starting Journal Socket.
[ 2.277479] systemd[1]: Listening on Journal Socket.
[ 2.277644] systemd[1]: Starting File System Check on Root Device...
[ 2.284435] systemd[1]: Starting udev Coldplug all Devices...
[ 2.339672] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.342468] systemd[1]: Starting Journal Service...
[ 2.349767] systemd[1]: Started Journal Service.
[ 2.410080] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.410260] systemd[1]: Mounting Debug File System...
[ 2.412840] systemd[1]: Started Machine ID first boot configure.
[ 2.415612] systemd[1]: Starting udev Kernel Device Manager...
[ 2.459781] systemd[1]: Starting Load Kernel Modules...
[ 2.523363] systemd[1]: Starting Apply Kernel Variables...
[ 2.528789] systemd[1]: Mounted Huge Pages File System.
[ 2.533918] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.545221] systemd[1]: Mounted Debug File System.
[ 2.613808] systemd-udevd[90]: starting version 196
[ 2.844792] Bluetooth: Core ver 2.16
[ 2.847733] NET: Registered protocol family 31
[ 2.847748] Bluetooth: HCI device and connection manager initialized
[ 2.847789] Bluetooth: HCI socket layer initialized
[ 2.847805] Bluetooth: L2CAP socket layer initialized
[ 2.847858] Bluetooth: SCO socket layer initialized
[ 2.876624] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.876675] Bluetooth: HIDP socket layer initialized
[ 3.025570] NET: Registered protocol family 10
[ 3.088161] NET: Registered protocol family 23
[ 3.107627] IrCOMM protocol (Dag Brattli)
[ 3.212149] Bluetooth: RFCOMM TTY layer initialized
[ 3.212225] Bluetooth: RFCOMM socket layer initialized
[ 3.212236] Bluetooth: RFCOMM ver 1.11
[ 3.318649] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.745804] systemd-journald[88]: Received SIGUSR1
[ 7.486416] udc musb-hdrc.0.auto: registering UDC driver [g_multi]
[ 7.486528] gadget: using random self ethernet address
[ 7.499210] usb0: MAC 42:d9:6a:3f:c1:bd
[ 7.499229] usb0: HOST MAC c8:a0:30:b4:09:96
[ 7.499575] gserial_setup: registered 1 ttyGS* device
[ 7.499731] lun0: open backing file: /dev/mmcblk0p1
[ 7.503220] gadget: Mass Storage Function, version: 2009/09/11
[ 7.503241] gadget: Number of LUNs=1
[ 7.503266] lun0: LUN: removable file: /dev/mmcblk0p1
[ 7.503277] gadget: I/O thread pid: 343
[ 7.503296] gadget: adding config #1 'Multifunction with RNDIS'/bf8f85b4
[ 7.503356] gadget: adding 'rndis'/dcc55480 to config 'Multifunction with RNDIS'/bf8f85b4
[ 7.503382] rndis_register: configNr = 0
[ 7.503392] rndis_set_param_medium: 0 0
[ 7.503404] gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
[ 7.503418] gadget: adding 'acm'/dcdbbe00 to config 'Multifunction with RNDIS'/bf8f85b4
[ 7.503439] gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in
[ 7.503452] gadget: adding 'Mass Storage Function'/dca3e2c0 to config 'Multifunction with RNDIS'/bf8f85b4
[ 7.503470] gadget: cfg 1/bf8f85b4 speeds: high full
[ 7.503480] gadget: interface 0 = rndis/dcc55480
[ 7.503490] gadget: interface 1 = rndis/dcc55480
[ 7.503499] gadget: interface 2 = acm/dcdbbe00
[ 7.503508] gadget: interface 3 = acm/dcdbbe00
[ 7.503518] gadget: interface 4 = Mass Storage Function/dca3e2c0
[ 7.503532] gadget: Multifunction Composite Gadget
[ 7.503558] gadget: g_multi ready
[ 7.503598] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 7.503953] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[ 7.503984] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[ 7.504054] usb usb2: default language 0x0409
[ 7.504089] usb usb2: udev 1, busnum 2, minor = 128
[ 7.504102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.504115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.504127] usb usb2: Product: MUSB HDRC host driver
[ 7.504139] usb usb2: Manufacturer: Linux 3.8.6 musb-hcd
[ 7.504150] usb usb2: SerialNumber: musb-hdrc.0.auto
[ 7.504605] usb usb2: usb_probe_device
[ 7.504622] usb usb2: configuration #1 chosen from 1 choice
[ 7.504665] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.508576] hub 2-0:1.0: usb_probe_interface
[ 7.508600] hub 2-0:1.0: usb_probe_interface - got id
[ 7.508625] hub 2-0:1.0: USB hub found
[ 7.508664] hub 2-0:1.0: 1 port detected
[ 7.508676] hub 2-0:1.0: standalone hub
[ 7.508686] hub 2-0:1.0: individual port power switching
[ 7.508774] hub 2-0:1.0: no over-current protection
[ 7.508787] hub 2-0:1.0: Single TT
[ 7.508799] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 7.508811] hub 2-0:1.0: power on to power good time: 10ms
[ 7.511304] hub 2-0:1.0: local power source is good
[ 7.511405] hub 2-0:1.0: enabling power on all ports
[ 7.612445] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 7.612508] hub 2-0:1.0: hub_suspend
[ 7.612536] usb usb2: bus auto-suspend, wakeup 1
[ 8.172887] snd-usb-audio 1-1:1.0: usb_probe_interface
[ 8.172946] snd-usb-audio 1-1:1.0: usb_probe_interface - got id
[ 8.204278] ALSA sound/usb/mixer.c:931 51:0: cannot get min/max values for control 2 (id 51)
[ 8.359848] ALSA sound/usb/mixer.c:931 49:0: cannot get min/max values for control 2 (id 49)
[ 8.428804] ALSA sound/usb/mixer.c:931 50:0: cannot get min/max values for control 2 (id 50)
[ 8.509147] ALSA sound/usb/mixer.c:931 51:0: cannot get min/max values for control 2 (id 51)
[ 8.590420] ALSA sound/usb/mixer.c:931 50:0: cannot get min/max values for control 2 (id 50)
[ 8.667139] ALSA sound/usb/mixer.c:931 49:0: cannot get min/max values for control 2 (id 49)
[ 8.760861] usbcore: registered new interface driver snd-usb-audio
[ 9.259333] usb0: eth_open
[ 9.259552] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 9.440312] usb0: stop stats: rx/tx 0/0, errs 0/0
[ 9.495847] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.565335] net eth0: initializing cpsw version 1.12 (0)
[ 18.569904] net eth0: phy found : id is : 0x7c0f1
[ 18.569937] libphy: PHY 4a101000.mdio:01 not found
[ 18.574987] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 18.645645] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.218534] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=0
[ 45.111526] fuse init (API version 7.20)
[ 61.618383] EXT4-fs (mmcblk1p2): recovery complete
[ 61.621332] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 120.027559] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
[ 304.516247] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
[ 305.420328] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
[ 306.660389] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
[ 307.412402] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
root@beaglebone:~# |
